Skip to main content

SMART EDITING

Smart writing with the Typewiser Assistant​

The Typewiser Assistant is the chat that sits beside your proposal in the editor. Use it to improve, expand, question and check what you have written, at any stage of preparation. It is not built to produce long stretches of proposal from nothing. For first drafts and full sections, the text generation built into your template does a better job, because it works from the structure and the prompts prepared for your call.

This guide goes past the basics. It explains how the assistant decides what to read and where to put its answer, and it gives you a library of ready-made requests to adapt to your own project.

Quick edits on selected text​

For small editing jobs you do not need to write a request at all. Open the assistant, then select a passage in the document. A row of editing actions appears above the selection.

  • Shorten: Cuts the passage down while keeping its meaning.
  • Extend: Develops the passage further.
  • Rephrase: Rewrites the passage in different words.
  • Simplify: Makes the passage easier to read.
  • Academise: Raises the register towards academic writing.
  • Undo: Reverses the last quick edit.

The result of these actions will be written in the chat. Read it, judge it, then insert it if you want it.

tip

Quick actions are the fastest route for a single paragraph. When the change has to follow a rule of your own, such as a word count or a shift in tone, type the instruction into the chat instead.

Writing your own instructions​

You can ask anything of the Typewiser Assistant by writing your request in the prompt box and sending it with the arrow button. What you write can be a question, an instruction, or a rough thought you want help developing. Simply type your request if the question is general, if the answer depends on the proposal as a whole, or if it depends on the material you have uploaded. Highlight a passage in the document first if the request is about that specific part, such as "explain why this objective is weak" or "turn these three sentences into one". The selection tells the assistant exactly what you mean by "this", so you do not have to describe the passage in words.

Every request also carries two settings. INPUT tells the assistant what to read. OUTPUT tells it where to put the answer. Both sit around the prompt box, and both apply to the request you are about to send. Choosing them well is most of the skill in using the assistant.

INPUT​

Select one or more inputs to give the assistant material to work from.

  • Knowledge Library: The documents you have uploaded: technical notes, CVs, market studies, financial data, evaluation reports.
  • Document: The text currently in the editor, that is, the proposal draft itself.
  • Knowledge Library and Document: Library and draft together, so the assistant can compare what is written against what is documented.
  • Peer-review papers: A search across peer-reviewed literature. This input is selected on its own and cannot be combined with the others.
  • Nothing selected: No project context. The assistant relies on its built-in knowledge and on the web.

Two additional sources are always in play without the need to select them.

Funding programme knowledge. This is built into the chat. The Assistant can answer questions about rules, structure, eligibility and evaluation criteria, and it is used as context when the assistant writes.

Web search. Triggered if you ask for external information. The assistant replies and reports the sources consulted.

OUTPUT​

Select one of the two options to decide where the answers should be written.

  • Chat: The reply appears in the conversation. You read it, judge it, and decide whether to insert it into the proposal.
  • Document: The assistant writes directly into the proposal text in the editor, following the instruction you gave.

How to combine INPUT and OUTPUT​

Input and output are linked, so the pair always makes sense. Choosing one can switch another on or off. Typewiser greys out every icon that is not available with your current selection, so the combinations that remain in colour are the ones you can use.

  • Choosing Chat as the output leaves the input free. Any input works with a chat answer.
  • You can select Knowledge Library and Document together.
  • Peer-review papers function cannot be combined with the library or the draft.
  • Choosing Document as the output always switches the Document input on, because the assistant needs to see the text it is about to change. You can add the Knowledge Library on top of it.
  • Choosing Document as the output switches Scientific papers off.

Depending on how you combine them, the same assistant can act as a sparring partner for your thinking, a fact-checker against your own material, or a drafting tool that writes straight into your document. The table below sets out what to expect from each combination, so you can choose the right pairing before you send your next request rather than discovering it after the fact.

INPUTOUTPUTTYPICAL PURPOSE
Nothing selectedChatLearning about the programme, general questions
DocumentDocumentRewriting, shortening, polishing and correcting the draft
Knowledge LibraryChatThinking, exploring and planning from the project material
Knowledge Library + DocumentDocumentWriting new proposal content grounded in the project material
Knowledge Library + DocumentChatChecking the draft against the evidence
DocumentChatReviewing, assessing and questioning the draft

Use case library​

What follows is a library of ready-made request examples. Each entry gives you the task, the input and output to set, and a request you can copy and adapt. Set the input and output shown before you send it. Treat the example as a starting point: the more detail you add of your own, the better the answer.

Understanding the funding programme​

What you can doInputOutputExample request
Check a formal rule such as a page or character limitNothing selectedChatWhat is the page limit for the technical section?
Understand how proposals are scoredNothing selectedChatExplain how the Excellence criterion is assessed and what evaluators look for.
Check eligibility before investing effortNothing selectedChatIs a Spanish SME with a US based technical partner eligible for this call?
Clarify programme terminologyNothing selectedChatWhat does the programme mean by commercial potential, and how should it be evidenced?
Check current deadlines and cut-off datesNothing selectedChatWhat are the next cut-off dates for this call?
Decide which call or topic to target nextKnowledge LibraryChatWhich other call would be the best match for what we do, and why?

Ideation and strategy​

What you can doInputOutputExample request
Brainstorm how to position the innovationKnowledge Library + DocumentChatSuggest three alternative angles for positioning our technology as the innovation of this proposal.
Sharpen the value propositionKnowledge LibraryChatWrite our value proposition in one sentence an evaluator would remember.
Check how well the project fits the callKnowledge Library + DocumentChatAssess how well our project matches the priorities of this call, and where the fit is weak.
Find the weak points earlyDocumentChatActing as a sceptical evaluator, what would you attack in the excellence section?
Judge whether your library is good enoughKnowledge LibraryChatReview the documentation. What further information would you need to prepare this grant properly?
Draft the project objectivesKnowledge LibraryDocumentWrite four specific and measurable objectives for this project.
Brainstorm project risksKnowledge LibraryChatSuggest the major risks associated with the project.
Brainstorm commercial strategiesKnowledge LibraryChatSuggest the best revenue stream for the new technology.

Structuring the proposal​

What you can doInputOutputExample request
Get an outline of a section before writingKnowledge LibraryChatGive me an outline for the Impact section, with the points I must cover.
Put the outline straight into the editorKnowledge LibraryDocumentWrite the skeleton of this section with headings and one line per subsection.
Build the work plan structureKnowledge LibraryDocumentDraft the work package structure with tasks, deliverables and milestones.
Revise the work plan structureDocumentDocumentModify the work plan structure, adding a work package on dissemination and communication.
See which uploaded documents feed a sectionKnowledge LibraryChatMap the documents in my library to the sections of the proposal they are useful.

Writing content​

What you can doInputOutputExample request
Draft a section from your own materialKnowledge LibraryDocumentWrite a state of the art description on this topic, using the review paper "Author, 2026".
See a draft in the chat before committing itKnowledge LibraryChatDraft the market section so I can review it before inserting it.
Expand a thin paragraphKnowledge Library + DocumentDocumentExpand the description of the target market using data from the uploaded market report.
Produce a risk tableNothing selectedDocumentCreate a risk table with mitigation measures, using the risks suggested in this chat.
Write the team and capability narrativeKnowledge LibraryDocumentWrite the team section using the CVs in my library.
Write the commercialisation and impact pathwayKnowledge LibraryChatDraft our route to market with the main steps and the expected timeline.
Find a title and an acronymDocumentChatSuggest five project titles and matching acronyms.
Get generic scaffolding to work fromNothing selectedDocumentWrite a placeholder paragraph on the state of the art that I will replace later.

Editing and refining​

What you can doInputOutputExample request
Cut a sectionDocumentDocumentShorten this section by thirty per cent without losing any substantive content.
Change the toneDocumentDocumentMake this more business oriented and less academic.
Remove weak and formulaic languageDocumentDocumentRemove vague and formulaic phrasing and replace it with concrete statements.
Make terminology and acronyms consistentDocumentDocumentMake the acronyms consistent throughout, and define every acronym at first use.
Iterate on a result you did not likeDocumentDocumentThat is still too long. Try again and keep it under two hundred words.

Reviewing and quality assurance​

What you can doInputOutputExample request
Have a section reviewed as an evaluator wouldDocumentChatReview this section against the evaluation criteria and tell me what would lose points.
Find what you have not writtenDocumentChatWhat does this call require that my draft does not yet address?
Place figures where they helpDocumentChatRecommend where I should place a figure in this proposal.
Detect internal contradictionsDocumentChatFind any contradictions or inconsistencies in this text.
Replace placeholders with real contentKnowledge Library + DocumentDocumentReplace every placeholder in this text with the corresponding information from my documents.
Check consistency across sectionsDocumentChatAre the objectives, the work plan and the impact section consistent with each other?
Have the assistant fix what it foundDocumentDocumentAdjust the three contradictions you identified between the objectives and the work plan.
Fact check external claimsNothing selectedChatCheck the market figures in this highlighted text against current public sources.
Identify repetition of conceptsDocumentChatIdentify every repetition of concepts in the document.
Remove repetitionDocumentDocumentThis repeats material covered elsewhere. Tighten it and remove the duplication.
Ask questions about your own draftDocumentChatWhat does this section currently say about our business model?
Summarise the draft for colleaguesDocumentChatSummarise this section in five bullet points, for a colleague who has not read it.
Verify the draft against the evidenceKnowledge Library + DocumentChatCompare my draft with the previous proposal submitted, and list every discrepancy.

Research and evidence​

What you can doInputOutputExample request
Perform a research on the state of the artNothing selectedChatWhat is the current state of the art in this field, and how does our approach differ?
Map the competitive landscapeNothing selectedChatWho are the main competitors and what are their limitations?
Find market sizing dataNothing selectedChatFind recent estimates of the size and growth of this market, with sources.
Collect supporting scientific publicationsPeer-review papersChatFind me the leading scientific publications on CAR T cells for pancreatic cancer.
Support a claim with a publicationPeer-review papersChatFind me a scientific publication supporting these claims.
Identify applicable standards and regulationKnowledge LibraryChatWhich standards and regulations apply to a product of this kind?
Trace where information came fromKnowledge Library + DocumentChatWhere does the information in this paragraph come from?

Compliance and submission readiness​

What you can doInputOutputExample request
Run a final checklist on a sectionDocumentChatCheck this section against the formal requirements and list anything missing.
Ask for guidance on a specific sectionNothing selectedChatWhat are the official guidelines on writing the gender dimension for this grant?
Prepare the ethics or compliance self-assessmentDocumentChatWhich ethics questions does this project trigger, and how should they be answered?
Check the annexes against the main textKnowledge Library + DocumentChatDo the supporting documents in my library contradict anything in the main text?

Resubmission​

What you can doInputOutputExample request
Analyse the report of a rejected proposalKnowledge LibraryChatAnalyse the evaluation report I uploaded and group the criticisms by theme.
Build a revision planKnowledge Library + DocumentChatTurn the evaluator comments I uploaded into a prioritised list of changes to my draft.
Apply the required changes to the textKnowledge Library + DocumentDocumentRewrite this section to address the criticism about the weak methodology, add details from the paper.